Fairing pins-dzus fasteners

Done a great deal of searching on-line, but thought I would get one more opinion from the VFR faithful.
1996-4th gen, lost two 1/4 turn fasteners while on a spin with the lower off. Honda wants 10 per, and washers (small, clear, plastic!) cost extra.
Found aircraft suppliers that sell same thing, phillips head and steel, for a buck- BUT
also found some D-ring head style (quick-off, for the pits at Laguna Seca when I run MotoGP) that are made for Ducatis.
Very nice.
Set of 10 for 32.00. That's both sides of my ride, and I can get them in black.
The length is a little tricky, but I'm gonna get the long ones (2mm longer) and just put in a thicker washer.
Anyone use these?
Any warnings?
Here is link to company selling them:
KurveyGirl - Motorcycle Stuff: Dzus Fasteners, angled valve stems, Vesrah and More
Did 5th and 6th gens go away from these fasteners?

 

I was going to go with some thing like your idea. Instead since I have all of mine I had my OEM's chromed. The other fairing bolts I went with Black Bird OEM bolts
BlackBird Items - Fairing Bolts by John's Bike Bits
Also had them chromed.
BikePics - Joe Foe from Buffalo's Member Page on BikePics.Com

 

snowing today

Didn't get down to cycle today. Will be getting these fasteners pretty quick, but give me a day or two.:thumbsup:

 

Got 'em and they're great

Took a picture of the originals, but it is snowy and cold and have not photoed the new ones as they are installed.
I'll cut to the chase verbally: they are exact fits length and diameter as the originals. :thumbsup: The new clips are exact fits, as well.:thumbsup: The head is black, it has a straight coinslot in it, and the D-ring. The D-ring is tight in the head of the bolt, so it doesn't flippy-flop. You can push them down to lay flat if you want.:thumbsup:

They hold real tight. I'm happy with the set of 10 (both sides of my 4th gen) and will probably get a set of 4 for replacements. Don't want to go back to the originals and mix and match. Then again, now that I know how to lose them, I can avoid riding with them unfastened. Thinking of a solution to the little nylon washers that are the only security between you and dropping a 10dollar bill on the road.

The red panel with black fasteners looks pretty cool.:thumbsup:
Go to KurveyGirl and get some if you want a good product. Shipping was 3.50, which I think is "cost", not some fake fee to jack up profits. Also bought some angled valve stems while I was ordering. Am I the only one who can't get a straight fill valve between the hub, the disk, the fork, the chain and the spokes on my tire?

 

Someone please tell me there is not 4 flippin threads on the same day on the same topic...

 

Wuz Confuzed!

And couldn't find anything the first time I searched- a month ago!:redface:
Is that so wrong?