jetting for 7000 ft.

Discussion in 'Mechanics Garage' started by pale rider, Aug 11, 2008.

  1. pale rider

    pale rider New Member

    Joined:
    Jul 23, 2008
    Messages:
    10
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    colorado springs
    I have a 91 with a yoshimura can and K&N filter. any recommendations on tuning for 7000 ft. It came from low altitude and is running very rich. should I get a dynojet kit or does anyone have specific recommendations.
     


    This site may contain affiliate links for which VFRworld may be compensated
    #1
  2. derstuka

    derstuka Lord of the Wankers Staff Member

    Joined:
    Jan 25, 2007
    Messages:
    6,733
    Likes Received:
    193
    Trophy Points:
    108
    Location:
    San Diego, CA
    Map
    Sounds like a rejet is in order if the bike is running really rich. The only thing is, you would have to make sure that you don't lean it out too much, because if you took a bike jetted for 7k down to sea level (or even near that), that would be running mighty lean, and very bad things can happen then. You might want to talk to some local tuners (or people with experience jetting bikes in your area) who can suggest what you should run.
     


    This site may contain affiliate links for which VFRworld may be compensated
    #2
  3. pale rider

    pale rider New Member

    Joined:
    Jul 23, 2008
    Messages:
    10
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    colorado springs
    Thanks. I've contacted dynojet for their recommendations. I live at 6500 ft and work at 8600 ft. and I don't plan on venturing onto the flat lands anytime soon.
     


    This site may contain affiliate links for which VFRworld may be compensated
    #3

Share This Page