Chain getting loose

Hi
I have a Honda VFR 800 2005. After tightening the chain I make sure the bolt is tighten to. But after riding the bike just few miles the chain is loose again. Any idea what the problem might be?

 

How many miles on the chain?

Tightening the pinch bolt to proper spec?

Sent from my SM-N950U using Tapatalk

 

24.ooo miles on the chain.

I followed the instructions in the handbook

 

I recall the pinch bolt is a specific length and HAS to be used with the spacer/brake hose holder. Without that, the bolt is bottoming out in its borehole and not applying tension to the pinch on the axle adjuster.

 

24000 miles is about done for chain

Sent from my SM-N950U using Tapatalk

 

^^ agreed. chain must be set for proper tension at the tightest spot (while turning the wheel) , and if it then has excessive looseness at other spots.......time for a new chain and sprockets. and there goes over $200

 

At 24k, I'd replace the chain and sprockets. I'd also check for tight spots. If the chain has more slack in some places than other, it's another indication of wear.

Let me say it again: chain AND sprockets. It's generally false economy to replace only the chain.