I've been looking for a thread about the actual procedure required to bleed the brake lines on my '02 vfr abs and have come up empty. I found some good hints in the archives, but can someone direct me to a link or a thread that gives the step by step directions? Also, if my rear brake pedal sinks to the stop without any braking power, and there are no leaks in the lines, is there any other problem I should be considering other than air in the line? Any and all help is appreciated.
no, sounds like air in the line. it is possible that the inner seals in the master cylinder could be bad in a way that the fluid is leaking back into the reservoir and not out. not really sure about the abs stuff though
Here is a good write-up on the procedure. http://www.vfrdiscussion.com/forum/index.php?showtopic=277&hl=bleeding Wargoose
