Free ???!! You could make $$ offa that ! :confused::confused:
Holes higher up on the tube go in FRONT cylinder carbs.
Most sadly, a local rider was killed recently by hitting a COW !
Be sure the emulsion tubes go back in the same carb they came from as fronts and rears have different height holes, i think.
"Than he" is proper, intelligent English. Nobody is immune from occasional stupidity.
Factory service manual has all the info you need. I'd post the relevant pages if i could.
Good try but........ Of all sudden malfunctions that's among the least likely. Once set, that shit don't change. :sour: I'm puzzled as to any...
Unless you've replaced it already, your stock shock is overdue for replacement. :eek-new:
Is it possible to replace REAR head gasket while the engine is in the frame ??:distracted:
Belongs in Anything Goes, not here. An idiot like you with a gun ?? :blue:
Very unusual, but it looks like TC was missing his spectacles when he read the ad. Those covers are among the rarest often-missing parts to find....
It's potentially a big mistake not to bring a VOLTMETER when considering any VFR purchase. If you don't verify that the bitch is charging the...
Don't use a hammer, kid.
In that case someone goofed up the adjustment initially. Bench synching carbs by eye should get close enough for that problem not to happen. The...
Didn't some goofball suggest it might be electrical, i.e., sparkplug firing intermittently ?? I doubt your carbs were far off synchwise.
On all my (non-fi) earlier bikes the number 100C. is stamped on the thermoswitch, so 212 F. I have no idea why FI bikes turn the fan on so late....
Whenever i clean carbs for members here i usually ask them to include the carb boots for my inspection. Often, very often i see cuts and cracks...
Strong stuff like that does harm to the rubberish compound the boots are made of, i believe.
At idle speed while sitting in traffic it's probably normal. Battery isn't being charged at idle, so the extra signal load would lower system voltage.
No fuel additives for me but Stabil is something to try if you don't want to pull the drain screws. Yes, i usually drain the carbs if the bike...
Separate names with a comma.
