Wait... are the brackets that are welded to the mufflers the same? That right one looks wider. Perhaps a repair? They should be the same...
You can perhaps slot the holes in the brackets a touch for one to go up and the other to go down. I would first loosen everything, including the...
You're right and I noticed that too. Just didn't mention it yet cuz it seemed the least of the worries. Might just be missing the outer washer.
I have 2 Daugherty shocks and I like them and like supporting him. Hagon, Wilbur and YSS are other options. I've also bought 2 YSS recently and...
Without complete disassembly, you won't get ALL the coolant out of a bike. How do you tell if a VF500F shock is bad? If it's the stock shock,...
I was bad somehow and must be punished. Assume the position. [IMG] So the 85 is getting new rubber, some adjustments to the front suspension...
I've ridden a couple EXUP FZR400R and they are magical. The vinyl-covered brick called a seat not so much. Also spent a little time on a FZR400R...
Close enough for me. And very cool.
FZR400RR SP 1992 - 1993
Well, Joe knows his shit and has the skill and experience to pull it off. It's gotta be BAD and need a paint job before I'm coating tho.
Everything I've heard/read says his kits are quite good.
Just do it. They are out, what better time. The hours now or more of the hours later disassembling again? The engine is gonna run exactly...
As long as you plan on removing the carbs later and really addressing them, go for it. But, in order to remove the rubber intake tubes, you have...
You gotta clean the anode and replace the solution, but it will get it all with some patience. The new rust dissolvers are pretty impressive...
Yep.
Sometimes catches, sometimes kicks out and occasionally sounds like a rock polisher? That is likely the culprit. Seen/heard it on a bunch of...
I'd start with springs and rollers.
Fill it with JB Weld and drill and tap (maybe even drill and tap for helicoil). With a new o-ring (and a light coat of HondaBond perhaps) that...
Separate names with a comma.
