one thing to think about......are you riding your machine in too high of a gear for the given speed? These machines don't respond well to being...
BZ, You are not dense, and no, you weren't being snubbed.
I have had my suspicions about the intent of this thread from the git go, but, I thought I'd bump this thread a bit to show just how divided we...
it really depends upon the skill level of the folks you are riding with
Hey Folkeses, This is Drewl At NorcalBoy's place for the weekend with SilverSurfer800!! The 4 th rocked here in the Bay Area. I rode 250 miles...
HeHe! You need to go get a pacifier and a box of kleenex :baby:..........don't play with the yellow sand in "YOUR" sand box.........
I am currently working an answer to this..........stay tuned
I installed the factory pro shift star and detent arm, with spring, monday.....easy install and the machine shifts awesome now. I recommend the...
You bring it on yourself, YOU start alot of the flame wars concerning this very subject, at least in the 9 months I've been coming here. Most of...
Thanks MD, I was hoping not to have to pull the switch out of the radiator, otherwise i would have to drain the system and go through that...
I am currently trying to cross reference an auxiliary fan switch that has the same thread pitch and length of the stocker and comes on around 205....
i would also check to make sure the air filter is installed correctly......and not hanging something up...
i would pull the tank back off and make sure nothing is interfering with the throttle linkage.......or that the cable isn't pinched.....
i have mine hand washed and massaged with very expensive mesh jacket bath oils from the far east, by a harem of 18 year old virgins......not -...
Factory Pro: Producers of the EC997 Low Inertia Eddy Current Dynamometer Series and Quality MC performance products
i can't exactly tell if they are the same from the fiche photo but you could pull one of your others and take it to the shop to compare with a...
carbs - 4th gen owner reference vtec - 5th gen owner reference :wink: Rambamatic can i ask a favor from you? Please, if you're going to...
carbs - 4th gen reference vtec - 5th gen reference :wink:
:bootyshake2:
Just by looking at the photo of your bike's passenger footpeg hangers and your rear fender mount, i would have to say that, no, they will not work...
Separate names with a comma.
