I have 3 VF1000R. My first one is a very nice original. Completely restored a 1985 that had been crashed heavily on it's right side. And an...
The screws are metering fuel for starting and idling mostly. And will affect a little bit just off idle too. What pilots jets are you running?...
The bike was hot wired. On those years bikes it gives total functionality. I saved somebody's day on a group ride with that one when their...
"You guys"? Hah. Just me. And beating 600 Hurricanes, 600 Ninjas, FZR600s and even a RZ500. There's been some talk of springs over the years....
There are quite a few differences, some more apparent than others. But you can run 86 carbs on a 84/85 engine and vice-versa. My race bike with...
I ran my VF500F race bike gravity feed from an 86 tank/petcock, reduced down to 85 carbs (fuel inlet on left front carb) with zero issues. And...
Definitely a good call on the replacement harness. You're gonna save so much time and frustration. And as a bonus, you now have a bunch of Honda...
Well.... the other part of the deal happened last night. Had to take the parts bikes. He got them down off of his high shop shelf and informed...
My first thought was the starter relay. You know everything after that is good now after jumping it. You might be able to borrow one off of the...
Been saying this FOR YEARS! Better yet, install a parallel toggle. Saved my ass more than once.
It's listed for $1500 on VFRD.
I need to dig out some 86 carbs and re-aquaint myself I think. Any way... if you clean the plenum "o-rings" good, you can simply use some...
Rogue... what do you actually need? Usually it's just the fuel cross overs and float bowls. Yes... sourcing just what you need individually...
Staintune polished and back on. I have one rear bracket for the muffler to paint after blending out the tool marks. Had to manipulate it quite a...
Maybe cutting off the thick section of a pilot jet and drilling it out to the correct size? [ATTACH] I'll take a couple measurements later this...
I've done it on some stuff years ago. You can also use it to get rid of the white creases when some colored bodywork has been bent too far. I...
Refinished stands installed. [ATTACH] More of the subframe assembled. [ATTACH] I bought another inner / rear fender to trim down a little...
Hey. I likely have some fuel pipes t00. But seriously consider what you time is worth regarding those carbs. That missing brass and associated...
Also... HACKS!!!! Stop thinking you can work on carbs!!!! JFC! I won't read a fucking thing and just get out my shitty pliers and get to...
My mistake. A-B. Looking at the battery, positive on the left, neg on the right. Vent on the right. Only difference to A-A is the side the...
Separate names with a comma.
