Have you checked your ground spider connector??
Congrats again..... rumour has it RG sliders are the strongest......
If you know the model, or look up the one for your application, the install guides are available on healtech's site..... just scroll down in your...
The corrosion inhibitors are being used up...... Google checking coolant with a voltmeter if you're concerned. Use long life (5 year plus)...
I don't quite understand it either.... switching phase is all that's happening. So I found this.........
I know I shouldn’t have done this, but I am 83 years old and I was in the McDonald’s drive-through this morning and the young lady behind me...
These are handy for that....... they used to be $60.... hopefully the truck has tiedown loops on each corner of the box....
Ruh roh..... good to see you here!! I am detecting more trouble this weekend......
You could also go 525 chain for a little less weight than the 530.
[ATTACH]
Well, that took me back a few years when I was the son relegated to driving the tractor, slogging small squares and sweating my butt off...
I bought a second hand SpeedoDRD from a member.... works great...... http://shop.12oclocklabs.com/SpeedoDRD/
Re: the bench sync...... I do not know if this applies to these carbs..... but I've used this method on FI TB's.... when the throttle plates are...
I'll confirm..... lowered a bike 20mm at the rear wheel and the side stand angle changed.... currently 7 degrees and IMHO definitely not stable...
Go naked.
You will need resistors somewhere, or a replacement flasher unit that works with LED's. There are LED bulbs with resistors built in.... suggest...
I say keep it OEM..... I think the reflectors look OK, front rectangular is normal on some bikes, although those look a tad longer than the...
An air chisel takes those off in seconds!
Separate names with a comma.
