I've got a 1990 going up for sale soon... [ATTACH] The rear looks like this now... [ATTACH]
I would prob buy that bike @ $2500 if it looked like it was decently done (except for the color), and wasn't a disaster under the bodywork....
Just cuz that other one wasn't OEM paint, how was it otherwise? What was the asking price?
Right now, in this used market? Luck for a nice one, a shitte tonne of cash if you find one.
Do yourself a favor right now and order the next size up pilot jets too.
Seriously? You come this far and you think it's wise to just leave them in place so you can't shoot carb clean and compressed air thru that...
Do not remove plenum. Do remove choke cable. Loosen all clamps. Heat boots with heat gun on low. (Important!) Skillfully lever the carbs out of...
Well too late for this... You always pull the carbs as a unit with the plenum. Unless you want to break fuel tubes. Then you flip them over to...
Great!
OK... another change. Bought another shitty muffler for the flange and fabbed up one more slip-on for a fairly crappy Two Brothers Oval CF...
Yeah, if it wants to move pretty freely, you could prob get away with no "damage". You might be able to get away with something non-metallic too....
Also.... any members live close enough?
If you back the pinch bolt off a bunch and carefully wedge the swingarm split open, you may be able to get movement with something other than a...
Very cool. Glad it arrived safe. Enjoy your Summer!
We swapped a couple bikes bodywork on the floor at the dealership for customers. Maybe it was something like that. Then later on in it's life it...
Johammer J1 - $35K [ATTACH]
Bl/w comes out of the kill switch on the right handlebar switch, which is solid black on the way in. And the solid black comes from the fuse box...
Welcome. Post up in the 1st Gen or Mechanics forums, no problem. I've worked on and ridden MANY Magnas and Sabers.
I have never seen that color as stock for any market. The wheels appear to be the correct color for 91 in the States.
I have replaced the wires on a couple 1000Rs, the fitting pieces can be moved over. The NGK wire I use is SLIGHTLY smaller than the factory...
Separate names with a comma.
