when i got my wheels back from cycle gear they were covered in grease and grime. so i figured i would clean them up with heavy duty degreaser, and...
so did you miss the dyno chart on the first page or something? head work by itself, made power everywhere, bottom midrange and 10 hp up top.
Hows the wet weather traction? I've put a hundred or 2 miles on mine and they're still scary slippery when wet. Literally spinning 4th gear...
[IMG] you are not going to see any real physical wear on the outside. they operate by ratcheting action. and when defective they will still seem...
No I didn't cut anything out. The BMC just literally fell apart inside my airbox. But I wasn't judging on the overal area of the filter after its...
That's actually pretty damn good for a nighthawk. I actually don't live in the keys anymore. I am going to school in Orlando now.
out with it
so after having driven on this set up for the past week or so, i can say that it feels pretty good. seems like a big midrange improvement, with...
Also after taking a verbal beating from norcal boy for years, my therapist has suggested I look into different velocity stack options as to no...
seems like everyones freaking out about air boxes and intakes and such all the sudden. well my bmc filter took a shit on me so ive been shopping...
bmc after 30,000 miles with proper care: http://i574.photobucket.com/albums/ss190/candyredrc46/1-Copy.jpg...
you are correct in that the hrc exhaust at 38mm start to finish is too large unless the engine is race kitted, but the factory rc45 system at 35mm...
ARE YOU 100% THE RC45 AND THE 1998 VFR800 HEADERS HAVE THE SAME DIAMETER PRIMARIES?? i think it also has a lot to do with the way they merge...
i think you guys are missing the point that 130 hp isnt going to happen while breathing out a simple slip on and 98 header combo. I've got a motad...
i have have had two electrical connection failures which resulted in my fuel pump not priming. both giving the appearance of a failed relay. i...
plus one. ive got 36000 on my 07 and the clacking was getting to be too much. i just replaced my cam chain tensioners. not a terribly hard job and...
I'm wondering with you guys running the cbr1000 coils, could you use a power commander ignition module designed to run on the cbr1000 too?
I read that same article. He was running 87 octane. And 4 degrees advance at idle on 87 octane is a big no no. Of course it ran horrible. I would...
Haha you right
Yeah bro let me just throw on a 10 year old electrical part on a bike that already has awful electrical problems. You think the pc2 will connect...
Separate names with a comma.
