Most 6th Gen owners prefer to go one tooth down on the front rather than larger on the rear, because any more than +2 on the rear and you have to...
I'm a short dude so I don't have to worry about lowering the pegs, but the first peg mod was accomplished by modifying a set of Buell pegs to fit...
I have one that was first installed on my '02 CBR600F4i, and on that bike it was helpful because I was always going into a corner one gear too...
This has been discussed on another VFR forum, and for taller riders the popular fix is to install lowered foot pegs. Check the link out and maybe...
Not sure about the older models, but the 6th Gen models have two O2 sensors in the catalytic converter. My O2 sensors are disabled with Dynojet...
I'm still not sure I agree that an exhaust leak can cause a serious drop in engine performance, but hey, what do I know? Just goes against common...
Any members here on VFRworld happen to be machinists by trade? I have a question about the possibility of fabricating an adjustable gearshift...
How could an exhaust crack cause a significant loss in power? I'm not buying it...
I need to buy myself a set of helibars too...just can't convince myself to spend $250 in the event I don't like them. But no, 41mm (1.6") is the...
I've lowered my 05 VFR, and the stock link is actually shorter than the one typically used to lower the VFR. For example, the longer link pushes...
Another good product is called BG44K. I used it in my Honda and VW cars every 10K miles or so, so I'm sure it's perfectly safe for motorcycles as...
My 05 has been doing the same thing...intermittent hesitation and stumbling like it's running out of gas. Over the past few months I've checked...
Give Tom a call at http://www.turbocity.com (714-639-4933) In my opinion I think it's best to talk to him, so he can decide if your VFR can...
Another vote for Staintunes...I absolutely love the way the V4 sounds with these pipes. Like jackson said, give Sporttour a call...ask for a...
My 05 also did this a few time when it was new, and usually only when it wasn't fully warmed up. And if I remember correctly, the VTEC engine...
Separate names with a comma.
