I got a 47t rear sprocket for my 02 and I can pull the front wheel off the ground at 4000 rpm's if I want to. Or do your let of then punch it in...
Ok I'm confused I thought "disconnecting the vac controlled flap that closes the other half of the box intake" was the pair valve mod. After I...
Yea they are pretty dirty in those pics... and I would love to take another pic but last week my camera fell out of my pocket while I was ridding....
ok so last night I put on the 47t sprocket. The stock chain was long enough, and the sprocket that was on the bike was the stock sprocket....
right now if I'm setting strait up and I'm going 3-4mph and mash it the front wheel will come up every time around 8 to 9,000 rpms. I guess I've...
ok... I ordered a 46 tooth sprocket and they called me up and said the closest they had in stock was 45t and 47t wanted to know if I would take on...
I've got chrome wheels... (look at the photo Gallery) The guy that owned it before me put them on. I'm guessing they are about 5 years old and...
Good point... the difference between a 145lb guy on our bikes vs a 250lb guy is going to make a BIG difference.
The Original Duplicate is not what I am but what I am striving to be. I don't want my life to be a copy of somebody else who's life is a copy of...
Yea once again the guy before me did that... Not sure where he got the covers? I normally have a small problem with people who buy something...
There is a tiny spot that chipped off already. It chipped right where water might have set next to the spoke. The owner before me did all the...
Thanks. Looks like a good little package. Any body have one of these? Just wandering if it's as good as it says on the web site?
I don't normally go over 135-140 My average speed around home and to work and back is between 60-75. I agree I don't really want to disable the...
They are the stock wheels just chrome plated.
Does the 330ohm resistor richen or lean out the air fuel ratio in relation to stock . Have you tested resistor that are more and less than 330...
Separate names with a comma.
