Hi, I was performing a starter valve adjustment on my 2014 VFR. I went to adjust the idle speed using the knob on the left side of the bike, but...
Hi, Anybody wrecked their 8th gen VFR on its right side only. I'm looking for a left hand mirror for the 2014 model. Don't want to pay the $100+...
Just looked on Partzilla.com and found they are not discontinued items but ship in 1-2 days. I find it hard to believe that fairing parts would be...
I have never had an issue with how the speedo displayed day, or night on my 2014 VFr.
I have heard of guys having success using the 1.25" risers from Motopumps. I have the 0.5" risers from them and they do help.
That's impressive to say the least.
Rode over 300 miles to the Oregon coast and back, no surprises what it needs. :) [ATTACH]
Update: The rear cylinder had a normal valve well below the bottom limit (0.007"), and a VTEC bucket that was just above the bottom limit. There...
Thanks for the referral, unfortunately that kit will only take care of the normal valve shims. The VTEC buckets are another matter.
The VFR did this: [ATTACH] So, do we perform another valve inspection, or skip it as the conventional wisdom goes? Based on my previous...
How many K's on the bike? Looks like new.
Personally, I'd take the bike out for a short ride sans fairing, then check it. Before my recent road trip I took off the lower and right side...
Not carefully enough-oops!
Nice bike, ditch the pipe and find some Staintunes or OEM for it.
Cool, and it's white-the fastest color. :)
I bought the OEM toolkit, and there's a cable for the purpose for locking a helmet part number: 77236-KAZ-780, it's in stock at Partzilla.
They are up for auction $450 is the starting bid. Here's the link:...
Just replaced all the brake pads on my VFR at 27000 miles, The rear pads still had plenty of life, but I just decided to replace them all. My...
Nowhere near that yet on my 8th gen.
Separate names with a comma.
