So I bought my first VFR (1992 VFR750F) this past winter. Unfortunately, I might have to relocate across the country so I'm trying to decide...
Here she is. Finally put together. Still working out some carb bugs but it's running decent. [ATTACH][ATTACH]
So I've asked a couple of people and they noted that the numbers just represent different flow rates and that the rate at which the float bowls...
I have a 92 VFR (Canadian version) and I ordered new carb needle valve seats. The ones they sent have a 2.6 stamped on the top while the originals...
Update: I took the carbs apart and one of the float needles was scratched up. It looked like it had some material stuck to it but I was unable to...
I wondered if it might be something with the float needle valves. I didn't know/think it was possible to check for leaks without having the tank...
Got it put back together and it was tough to get everything lined up but I figured it out. Before tightening down the camshaft in place I had to...
So I just cleaned my carbs on my 3rd gen VFR and after putting it all back together and starting it up I noticed fuel is dripping out of #39 on...
Thanks vfrcapn. I'm glad I didn't screw anything up or have a part that's screwed up. Once I get the new valve cover gaskets I'm button her back...
Pics ... yes, good point. I will post some once I get it put back together after I get the valves and carbs finished. Thanks for the welcome!
Hello all. I recently purchased my first VFR (3rd gen with approximately 45K miles). The bike is cosmetically challenged but runs well and the...
Hello all. I recently purchased a 3rd gen VFR with approximately 45K miles. I checked the valve clearances and found one that is out of spec...
Separate names with a comma.
