Bypassed the fuel cutoff relay and it seems to have fixed the problem. Thanks to all for the advice!
What is the best way to bypass the fuel cutoff relay? Do I just disconnect it? Do I need to cut the wires before and after the relay and tape...
I want to thank you all again for your responses. I tore the bike apart today and noticed that the fuel filter was installed backwards (not...
I did replace the insulators and all rubber/plastic pieces I could get my hands on. They were in pretty bad shape.
Thanks for the reply. I'm definitely going to start with the gas cap vent and the easier fixes mentioned above before rebuilding the carbs. I...
Awesome, thanks! I know it's a stupid question, but what purpose does it serve then?
Thanks for the reply, I will definitely look at that before I pull the carbs (again). Have you noticed any ill effects after eliminating the fuel...
Thanks for the reply. It runs great (no popping or snapping) 99% of the time then out of the blue it will start to die and only pulling on the...
Thanks for the reply. I'm going to look at the plugs, fuel filter and fuel line tomorrow, and will now also look at the vacuum lines. I'm...
Thanks for getting back to me. The bike will idle/run on it's own after 1 to 1 1/2 minutes of warm up, although I tend to choke it longer than...
Happy new year to all. I own a 1986 VFR700F2 that I've had for 20+ years. It has a Dynojet jet kit, Kerker slip-on pipes, K&N air filter and the...
Thanks for the advice, I'm in Chicago.
Thanks, I'll give it a shot.
I own an 86 VFR700 and am planning to do some past-due maintenance myself (carb cleaning, fluid/filter replacement, etc.) and was wondering which...
Separate names with a comma.
