People not updating problem threads with the results is one of my major irritations on the interwebs, nothing worse than finding someone who had...
<this is a repeat post I've put in other related threads> Well, I'm going to tentatively say....I've fixed mine. After 3 years of head scratching...
Well, I'm going to tentatively say....I've fixed mine. After 3 years of head scratching and getting nowhere I realised I'd never actually gone to...
Did you resolve this? There are a couple of us with this very same problem pulling our hair out trying to figure out something even Honda can't...
I have a suspicion of a partially stuck open thermostat. So, tell me chaps; from cold startup does your right radiator upper half get warm...
Is it possible to change the wax idle without pulling the throttle body? I know there's two screws on the underside that need to come out and...
I had a look at the fpr last year when mine was doing it, couldn't find anything wrong. Mine is doing ti again now that the British weather is...
It must be something along those lines, mine is starting like a champ now that ambient temps are above 10C. I adjusted the nut on my wax idle so...
Interesting that it persisted even after a new wax unit, so i's obviously not that then. Adjusting the wax unit doesn't stop it happening either...
Directly; nothing. But enabling/disabling the PAIR requires adjusting the idle speed, which in turn may affect the starter valve sync if already...
I have a feeling if you re-balance your starter valves with the idle set right for the PAIR re-enabled it'll all start as it should. That's what...
Well I think I can categorically state, it's the PAIR valve mod. I had mine re-enabled for a while to do some MPG testing so I thought I'd...
So now that it's got truly cold here in Blighty I thought I'd update. Basically; sorted! I balanced the starter valves, doused the linkages and...
Would love to see if a new wax idle cures it but like you say they're not exactly cheap (Although the chaps in the States seem to be able to get...
Separate names with a comma.
