Can do - take .... I'm guessing a year or so before we'll be running again.... Lots to do! Will tap off onto a T-piece at the bottom and slap on...
Wilco Have just measured the bottom banjo internal hole with my 'very-near' - near as dammit is to spitting 2,9mm - think I will leave it as it...
Cool - too bad I already tossed the old oil pipe :-(
Just had a quick look and placed the carbs loosely It seems as if this will increase the clearance (routed around the other side of the coolant...
Hi Jamie Thanks for the advice Havent had the carbs back on yet so will keep the clearance in mind. Thanks for the indicative hole size - will...
Your wish, is our .... Flow should be good, biggest worry is that there will be a too great a drop in the crank gallery... hence my question as to...
Oil Mod Either of you two (Ronald/scario) choose to pursue this mod? I'll be curious to hear what you guys discover. HI Guys Have done the...
DRill and Tap on Monday HI All Jamie - A quickie... What is a good starting point for the restriction size? eg: The diameter of the 1/8in NPT...
Volks Have no idea - but Jamie Daughtery should be able to help as he converts VF to CBR600F2 wheels. Good luck
very naked.... That's plenty naked Jamey! Question - how loud is your exhaust, have a VF750F(E) '84 that I'm doing up and want a stubby like...
Separate names with a comma.
