Gosh dang it!!! I can't catch a break!... So I got the carbs off and reset the fuel screws back to the way they were. Good! Then my old man...
Hey guys, need more help. So after looking at my notes I decided I should return the fuel screws to the way I found them (1 3/4, 2, 2, 2 1/4) and...
I cleaned the carb a second time and replaced the jets. The jets I got were factory from honda. I kept everything on it all stock. One of the...
ok, thanks for the info guys. ill check the coolant and oil, also see if it goes away after a few minutes. also another thing, it is still...
Now I have white smoke. How effed am I? *Update* Hey guys, I'm back once again! Restored/cleaned up the bike. Cleaned the carbs. Got her...
ok so im looking at it now. what it looks like i need to do is just take the bowls off and put the carb at a 45 degree angle. Then bend the tang...
I got a clymer repair manual and I'm looking at the carb assembly. Don't see anything that would adjust the float hight. What is this FSM Bible...
There is a way to adjust float hight?
Yeah im going to rip it apart again and go through the whole thing. Is it normal for a VFR to use the choke to start up every time?
No i didnt use dyno jet. I got factory jet parts from honda. Expensive as hell.
Toe cutter, Unfortunately I never tested that. The first time I just cleaned the carbs and never messed with the fuel screws. When reinstalled it...
Hey guys so I rebuilt the carbs and got everything reinstalled. It was having some trouble starting at first (Only able to run with the choke all...
Ok thanks! I have a friend that is a tech coming by. He is going to adjust the fuel air mixture screws and get everything synced. If that...
Yeah mine are definitely there and on the inside. [ATTACH] Still trying to find out what those holes are. [ATTACH] As you can see they are not...
Oh wow. Sorry guys but it looks like I'm wrong. And that could be a good thing. I believe I do have the air/fuel screws. Turns out they are on...
Ok guys. Can yall give me the run down on what needs to be done? Tuning the fuel screws. Im about to go to the local honda shop and see how quick...
Ooooh shiz!!! I just took a look and from what I can see they are missing!!! [ATTACH][ATTACH]
Oh and Wagzhp, thank you for your service! My best friend is a USMC Infantry officer. You guys ROCK!!!
This is strange. I just did a full carb rebuild and all of the jets were clean and clear as day. Now whats the deal with the fuel mixture screw? I...
Ok thanks bro, I fixed that problem and got the bike to start now. Using the choke helped a bit ;) Now for some reason it feels a bit off....
Separate names with a comma.
