So I did a little research and it appears the engines are placed at different angles in the bike but the 90 degree angle between the two cylinder...
Thanks for the reply. I guess i'll have to sell those and buy the correct ones.
I recently picked up a 1983 vf750f frame and engine for free. I have several parts from bikes that I parted out.does anyone know if the carburetor...
I recently removed the engine from the frame and will be painting the engine. I wanted to remove the cooling piping that is attached to the...
That tank is Very nice but too expensive. It will probably cost $1000 with delivery from Germany to the US. Thanks though Duccmann!
Hi Fellas, I am looking for a VF1000F tank. If you have an extra tank please PM me some pictures and your asking price. Thanks again Arnold
I just saw this post on Craigslist Arizona. I talked with the guy and he has about 8 VF1000R that he took apart to build one nice VF1000R but...
Thanks, I believe those are original clipons cuz they came on both bikes. I only had one good set though. I'm planning on doing a front end swap...
Here's a picture of the donor VF1000R [ATTACH]. I'm planning to use the forks and rear assembly from this donor bike and put them on the running...
I finally was able to get the Yoshimura exhaust off the other bike to put on the running VF1000R. The cleaned up nicely with pinesol and a...
I saw this video about thermocure which is a rust and flush product for radiators. I may use this product for this purpose. check out this video...
I got a little work done today on the disassembly. I worked mainly in the rear of the motorcycle. I had to modify a engine stand to hold up the...
I moved the VF1000R into my "work area" i.e. next to the tool cabinet and started the deconstruction. I'm amazed by how much wiring is used on...
I appreciate it Duccmann! Trying my best. I'm gonna try to find ways to lighten this project. Since this will be the restomod bike, I'm gonna do...
I think the reason why the bike is running this way may be the float height that I changed. Today I had the bike running with an external tank...
Thanks Mike. I'll try going through them again. Also I'll try to get the float height at the correct heights. I'll take a photo of the float heights.
So I've cleaned the carbs pretty thoroughly via ultrasonic cleaner and flushing all the circuits to make sure they are patent. I removed the...
can you guys give me any advice on the air/fuel mixture needle? I just wanted to try to see if this will make a difference. Its currently at 1...
Thanks for the tip. Just bought the manual. I may just have him clean and rebuild them. His prices are a bit steep but you can't beat his...
So far I have cleaned the carbs twice. I cleaned out the air fuel mixture needles and set them and 2 turns out from seated. I cleaned out all...
Separate names with a comma.
