Nice work. I placed gussetts on the rear hub support since the swing arm box tubing was rather thin. Then boxed in the ends of it. I've...
just a generic 6" wide rolled fender, I went with 14ga
yeah, but can flossie ride a high cradle wheelie
And here's a little video of the build YouTube - V4 Honda Chopper Build
just checked the low speed idle on the carbs, they were only 1 and 3/4 turns out. So I started stepping them out 1/4 turn at a time until I...
Judging by the exhaust I wouldn't think I was running rich, no black smoke, or hint of smoke. I suspect that the carbs are stock jetting...
Yeah, I took it to the gas station last night and it has a problem running at part throttle with the choke closed and opening up. I gave the...
Thank you MS paint for slapping together a rough profile picture. Not to scale, but you get the picture.
I had to move the rear tank support forward due to the new positioning of the frame.
Yeah I need to fab a kickstand. Also need to fix a leaky site glass on the front brake. Turbo and megasquirt will be completed during the...
thanks Here's a walkaround video: YouTube - V4 Magna Interceptor Chopper Bobber Walk Around
It is gravity fed, so no fuel pump. I took out the reserve for a couple of reasons. 1. It looks cleaner. 2. Well it just doesn't fit anymore...
And I'm done! Bracket painted, swapped the better of the two fork setes onto the bike, lights are wired up, and here are the final build pics.
Just place the bike diagonal, lock the steering and wedge the front wheel in the bed corner. Strap down either side of the front and the rear to...
finally got some time this morning to build a bracket for the headlight, running lights, and the fork bag. I think I may have the light housing...
No idea, suppose it would be a good idea to replace it. According to the gauge, which really just says cold or hot, it's running cool I would...
Got tired of waiting for the headlight to arrive so I rigged up the headlight from the interceptor, ugly but functional. Took it on a 9 mile test...
It DRIVES! Thank good I went with a spring seat and not a solid foam one. And wow does fiberglass wrap stink as it burns out. Bad ignitor was...
Bad ignitor. I was looking at the wrong connectors and made edits to my posts above so there's no confusion when someone searches this post....
Thanks, that is helpful. 1984 is the year of the bike and I'm using primary the V30 (500cc) electronics. The pulse generators are also from...
Separate names with a comma.
