I have an 1986 vfr 700 that had all the Cali emissions crap on it. I took it off and I'm not sure I plugged the correct holes on the carb. What...
That's not a problem out here in the corn:drewl:
https://www.ebay.com/itm/153176572171?ul_noapp=true
OK I found a website where a guy posted pictures and directions on how to delete the entire system on the exact same year and model as mine. I...
Does this big black canister mean it has Cali emissions?
I can't find a diagram that shows the routing of all the vacuum tubes. I understand many of these are for emissions and can be removed without...
I ordered one without a key from China. I'll let you know how it works out.
I need a new fuel tank lid for my 86 vfr 700. The only one I can find on line is for an 86 vfr 750. Will that fit? Thanks! Bill
No. This is going to be a long term project. I had to drill the gas cap to get it open and it's a mess inside. I cleaned the carbs already but...
I figured it out. It was a bad kill switch. I took the little screw inside the assembly and little pieces fell out all over. Thanks for the help!
That's a good idea. I imagine all the safety switches occur before that point. Do you know which wires bring power to the CDI off hand?...
Good point. That would be a bummer. The compression is good. I just need to figure out how to figure out where the system is breaking down. I...
Yes and all fuses are good. At least the fuses next to the ignition keys. Any other ones hidden throughout the bike? I have already restored a...
Hi All! I'm Bill from western Illinois and I just picked up an 86 700 interceptor that has been sitting outside under a cover for 21 years. Just...
Separate names with a comma.
