Hello looking for a progressive rear shock for this bike or something similar better than stock. Have a progressive in there but it’s getting...
1996 vfr - the manual says i can use 86 but on the bike it says 91 - which is correct? also - checked with voltmeter - around 12.35 when idling...
changed stator changed it recently. i think prob is battery. also noticed i had loose negative lead. ordered new battery and got new screw to...
Battery died - running First Gear heated vest and gloves. Haven't had this problem before - wondering if VFR idling has enuf juice to power both...
for a while my bars are slightly tilted to the right - after a tip-over. I had the front end completely rebuilt and still have the problem. The...
thanks wildstang. i'm very mechanically incompetent but that sounds like a great idea - i'm going to try it - thanks
Last Fall I fried the electrical system on my VFR. I was wearing a heated vest AND heated gloves from First Gear at the time. I didn't have to...
i believe my calipers need to be rebuilt - pulsing at the bars - could a dragging caliper cause the rotor to warp?? thanks for all the answers
Hello - I noticed my rotors were warped so I put brand new ebc rotors on. After only about six hundred miles they have warped worse than the...
yes - should have mentioned did have crash. any way to check frame / or align rear wheel? thanks - alex
When I'm going straight feels like my '96 leans slightly to the left - could my frame be bent? is there a way to adjust rear wheel alignment?...
I've been having carb issues for over a year. I had left the bike for two long without running it, and ever since then, have had overflow...
Thank you Tim Traxxion seems pretty on it. When I get the money - i'm definitely going to order from them. Thanks so much for the tip. Alex
Any aftermarket rear shocks available? Haven't been able to find one. Honda charges $900 for a replacement . . . Thanks!! Alex
Would a 180/55/17 work ok as a rear instead of the 170/60/17 on the same size rear wheel?
I read an alarming post about R&G frame sliders not working on a pre '98 bike: "Those of you with R&G frame sliders or contemplating buying...
centerstand? I scraped my centerstand on the left - have you guys had that problem as well? have you taken yours' off? ab
there's a guy on ebay who sells them - i bought a carbon fiber tree cover from him - http://www.skurccf.com/
Hey guys - anyone know of frame sliders for this bike?? if i do drop it, would hate to replace expensive parts . . . thanks in advance ab...
Great Thanks for the info - that's great to know ab
Separate names with a comma.
