I have a set of side covers but one has a tab broken off. Here's a pic. Where's the starter soleniod located by the battery? The seat may be sold...
To loopsandlogic: The only ones i have are the tank rubbers. If your intersted i'll take $20 for them including shipping. Here's a pic. [IMG]...
No the wheels are in good shape. I don't know if they will fit a 700 though. Chris
$50 plus shipping Chris
Yeah. I have black ones too. Chris
How's $20 including shipping? Chris
I'm parting out my spare bike. If anyone needs anything let me know what you need and your e-mail and i'll send pics and a price. It's stripped...
I just did what they recommend in the book. Get the #1 cylinder to TDC then rotate it 90 degrees to get the #4 cylinder where it needs to be. It...
I'm adjusting the valves on my 84 VF500F. It's only the second valve adjustment I've done. I haven't done any on this motor. The problem is I...
I was wondering if anyone else had ridden any of the other 500's out there and how they compared to the interceptor. I had a 91 GS500 and I think...
I e-mailed dave dodge. He said he doesn't get those anymore and he also said the same thing that the rears have been discontinued. That makes no...
Has anybody found a source for head gaskets? I'm planning on replacing the rings in my spare motor and I'm pretty sure I'll need some. Is it...
I don't understand it.It doesn't seem like it should take a really tight seal since there's only a little bit of oil in there.
I have two problems. After syncing the carbs I can't get it to idle right. It either want too idle too low like around 500 or it want to be at...
It's an 86 VF500F. I'm thinking it has to either be the petcock or it's not getting gas while going uphill for some reason. It ran out after I...
It's gravity fed. The filter is fairly new. Yes. I don't think so. Could the screen in the petcock bowl cause this? It was on reserve....
I went for a ride yesterday and just as I pulled in the driveway the bike stalled. I looked at the fuel filter and no gas. So I put some in today...
I sync'd the carbs yesterday using the $4 homemade tool and it works pretty good. The bike runs alot better too. It's no longer sluggish below 7K...
May I ask why your not doing it youself? I clicked on the link and it looks like you know engine.
Your carbs are rusted inside? If they're really bad I'd look into getting a set on Ebay. You can get a good decent set for under 100. Try to get...
Separate names with a comma.
