31 August 2016 Hi All: Problem solved. I harken back to Cadbury64's original comment "Mike you might have a bit of debris lodged in the tiny...
Not a bad idea, but I would wonder why that would work? Hmmmm. Never know. Since I was in the general area this morning, I stopped at the local...
29 August 2016 Fresh Update: The frustration continues. The new clutch parts came in, and I installed the nine new clutch plates and replaced...
Cadbury, Thanks much for all the info. Very helpful. My VFR has only 29K miles. I will order the Honda OEM parts today - it's all available...
17 August 2016 Hi all - thanks to KennyBobby, BadBilly, NormK, et.: Here's an update -in between all the other distractions and shiny objects...
14 August 2016 Kenny, Thanks for the clarification. I rode the bike again yesterday, and it was much better. It took longer before the...
Cadbury, Good idea. I'm about to go do just that. The bike has not been operated in about 30 hours, so if the clutch has returned to normal,...
12 August 2016 OK, here's an update. This morning, I did a complete fluid change and flush and removal of all the debris and crud in the...
Cadbury, Thanks for the quick reply. I did use a Mity-Vac to flush and fill the brakes and the clutch with new fluid, but I'll check again and...
Ladies and Gents, I have just completed a comprehensive restoration of my son's former 1996 VFR-750. It was repainted with new decals, tank...
Ladies and Gents, I'm brand new here. I have re-inherited my son's 1996 VFR and it has not run in at least two years. The throttle shaft will...
Separate names with a comma.
