So the air/fuel mixture pilot screw. Gotcha Interesting that you say, "1-3/4 turn out" I think stock is 2-1/2 turns out. I'll play around with...
Are you talking about one of these guys? https://v4dreams.com/uploads/3/5/5/2/35528301/img-4850_1.jpg [IMG] Or this guy? [IMG]
Thanks so much for the responses gentlemen! Do you have a clip of your exhaust? And when you say "Start with your fuel screws at about 1-3/4...
Hey guys, I'm looking for some advice on how best to tune this bike. The back story on this bike is that it used to be raced in the 90's when it...
Weird, partzilla's ebay posting is still up for it. https://www.ebay.com/itm/283794302962?epid=16017014607&hash=item42137567f2:g:4OUAAOSwPotZ5MuC...
Hmm It's not ideal but it's times like this I just walk away for a minute and slow it down. Start small and work up sort of thing. 1. Check...
Well.... on the outer steel casing of the starter clutch various raised tabs have been pressed in and the pulse generator pick up the signals from...
Thanks. :D It only took me 15 years. lol
Stumbled onto this the other day: https://vfrworld.com/threads/pulse-generator.47878/page-2
:Lol:
Already done. The starter clutch is comprised of 2 pieces. The inner piece which is a cast center hub.... and that's the piece that cracks....
Mine started doing that. What it turned out to be was the starter clutch bolts had loosened themselves out. While loose.. it allowed the starter...
:Peace: Thank-you SO much!
Something is definitely going on. Check stack height. Make sure the slave rod is in correct position. Bleeding it wouldn't hurt it but you...
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! THANK-YOU !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! I'll send you a pm.
It would be incredible if you had one!
Known account names: jesusgavi79, fmack09 Known emails associated: jesusgavi79@gmail.com, mcculloughscoot@gmail.com A new member.....
I can't imagine loose welds bouncing around in there would be a good thing. :Nono:
So.. in the event that I can't find one. A couple solutions that come to mind for me are... 1. Buy a new (28120-ML7-690) starter clutch.. then...
Well it appears that the part is discontinued. I've created a WTB thread about this part. Here is the link:...
Separate names with a comma.
