Hi All So I'm bored and looking for something to tinker with and seeing as I like removing "redundant" things I'm considering removing the PAIR...
Yeah that would make sense, then on side stand and bars all the way to the left would be level. I did have a look and the pads are fairly low,...
Hi All I just want to double check, in which position should the VFR be when checking the brake fluid level? Side stand, main stand, bars facing...
Nevermind, figured it out. A T-handle screw driver and a clean hand to grip the bar end with and presto, it's off. Never had a motorcycle with bar...
Hi All Silly question but, how do you remove the bar ends on the VFR? I've obviously tried loosening the screw but the whole bar end just seems...
Just out of curiosity, does his tune only remove limits or is there some additional performance as well? Like say you want to do exhaust mods...
Definitely did, put a bit of Copper slip on the pins (after cleaning them) as well as the screw shaft. Thanks
So I removed the parking brake and as I opened it a little circlip fell out. Then removed the slide bolts and popped the pads out and you could...
Yeah thinking about it now, the "caliper" does sit at the bottom of the disc, so probably needs a good clean and lube. Thanks
At the moment I don't have access to a garage so will have someone check it on the next service, thanks
Hi All Is there a way to make the parking brake a little more useful? When I got the VFR you'd barely notice it was activated so I adjusted it...
I've not changed the plugs and to be honest I'm uncertain about the maintenance history (bought the VFR from a dealer last year August and they...
Hi All I've got a 2011 VFR12F DCT with 38k kms and I've noticed a few times now that sometimes as I start it there is this instant little...
Separate names with a comma.
