The brand name is Powerbronze, it's for a VTR1000 aka. Super Hawk.
Adding new forks (CBR F3 uppers w/Race Tech Gold valves, VTR1000 lowers, CBR 600RR calipers) and a Brembo radial master cylinder, with any luck...
Fromm what I found, most of the Two Bros. cans are 50mm or 2 inches, so you can get another can for another bike and it should work. I've got one...
Received the speedo today, looks great thanks!!
I don't think 4K is too bad, if the bike is clean and doesn't need ANYTHING, it sounds fair. FWIW I wouldn't sell mine for any less. People ask...
11.90 is not bad, the best I've gotten my 93 VFR is 12.03 at 110, it seems whatever my time is 110 is always my trap speed.
I had two dents, from the right handle bar in my tank. One was, say softball sized, and the other was golfball sized, about 1/2 and 1/4 inch...
Just say no, to the stickers.
You could also wrap the headers with header wrap.
I've tried the compressed air, and a dent removal kit that you hot glue gun a patch on the dent, and then try to pull it with there tool. I...
That's awsome!
Man, I'd kick someones puppy to get my hands on all that plastic! Just kidding...... unless you want to work out a deal. LOL
Do they still make 'Grunge off', as I recall it worked great.
Got the sprocket, Thanks!!
S100 Motorcycle cleaner, or laquer thinner, then Mothers wheel polish.
I put two of these on my trailer and love em. I also use tie down strap too, just to make sure. Motorcycle Wheel Chock
If Mila Kunis walked by, that could happen. I know it might happen if she were to strut by me anyway. [IMG]
I have a set of Two Bros. block off plates on my bike, as I recall, they also fit some year GSXR. If you do a bit of research you might find out...
I think you're chasing a problem that doesn't exist. My VFR generally runs like your 56 ohm picture, only if I'm in traffic for a while will it go...
Bleeding the clutch is just like bleeding the brakes, and I use DOT 4 brake fluid for the clutch.
Separate names with a comma.
