[ATTACH]
What aftermarket regulator?? RM? I'd be checking that charging voltage first thing, likely way high. Suggest you upgrade to a Shindengen...
Likely your calipers are OK...... especially if you already rebuilt them. Check the return hole in the master cylinder is clean/not blocked. It...
I'd just ride it some more and more frequently.... to ensure the rings, etc. are loosened up... it all may go away.
While outdated a bit, this fork oil comparison might be helpful.... compare centistoke values as they can vary quite a bit by brand for a...
Time to go over all the connections in the charging system.... chassis ground, starter relay, stator connections....
To get scuffs out, I have also used Novus #2 plastic polish for paint.... good for small areas, put some on a microfiber towel and use elbow...
I have a large collection of music, much like the list above, but I see I'm missing some, lol... out in my shop I have a Yamaha home theater...
I don't have my Gen5 any more, and the Delk bracket went with it..... if I can remember, there are two bolts up under/behind that side panel......
Dunno about that one, but Delkevic has one.
How dented is that tank? I had one I used a cheap Chinese (replica of the ones you can get here for $$) paintless dent repair kit. Comes with...
By George, you've nailed it!!
Sounds OK to me, the only other thing is to put fuel stabilizer or Seafoam in the fuel and run it for a bit. I wish they'd brought that bike over...
I can't think of where..... that's a screw that goes into plastic judging by the threads. Airbox has a bunch but they are 20mm long and I don't...
What bike you riding? Might help to narrow it down some........
To clarify, the PAIR system is a passive flow of air from the airbox when the solenoid opens (on decel). The air travels through the reed valves...
Ethanol fuel is OK if you manage it. If the bike has been sitting a week or two, the ethanol will saturate with water and then additional water...
Separate names with a comma.
