45 or 90 deg bend?
I'm going to remove and replace my tires soon and valve stems soon. I find the standard straight valve stem makes it a slight pain to check my...
So after a spirited 30' ride, no more strange noises. I'm not complaining. Thanks all for your help.
Thanks for your responses. My bike has 44K miles. The noise is there at start up. I rode it about 6 miles after the oil change before I had...
Hey my VFR family. Was running dino oil for the last 44K miles. I just did my first oil/filter change using Amsoil 10-40. Now I'm having valve...
He he he. It helped to connect the hi beams to the harness... FIXED! for now.
Well, jumped the black/red wire. Have low beams now, BUT NO HI BEAMS!!!!
The bad connection is the black wire with a red stripe that is common to both hi and lo beam relays. After the harness connection, it goes on to...
Looks like a bad connection at the blue harness. Unfortunately, it's intermittent, but it looks like there is only one wire in could be, that...
Recall was done. Lo beam switch is OK. Interestingly, I get 12V at each light socket, but once I plug a bulb in on either connector, my voltage...
I appreciate all your input. I checked the voltage at the battery and the bulb connectors. I get 14V across the battery terminals with the...
Alrighty then. I have an '02 6th gen. No lo beams despite 12V at the connector. H4 bulb replacement yielded bupkis. Not the starter switch or...
Separate names with a comma.
