Imtiaz, i only had a race rvf400 with race glass etc. My seat had 2 holes near the back edge which were for access to screws that held the seat...
Have you got fuel filter(s) that need replacing????
Hey Michael, any chance for country of origin icon etc on each members postings, would help with advice on mech mods, no good sending my forks...
Quick and easy check for vacumn leaks between carbs and engine. Use any spray can of WD40,CRC, Selleys RP7 or spray degreaser. With the engine...
Dejapong, I missed your original comment on removing the vacum line has no effect. As this would allow air to be sucked directly into a single...
Trail braking is a most useful technique for both road and dirt, applying the back brake but also throttle at the same time. Very useful in...
Most new bikes now have digital speedos, the pickup for the electronic signal can usually be found on the front sprocket cover. The pickup unit...
Looked at dyno graphs the other day, doinbikes.com.au Staintune looses 3 - 4ft-lbs torque @ 4 & 5 thou rpm, catches up by 6, however if you add...
Turbo??? Where are you? S & R Pro Sydney do lots of turbo conversions, 92 vfr should be camchain model, custom head gasket to drop comp ratio....
If your bike has 100,000 km then the problem could be the carby needles and needle jets (sometimes called atomizers or emulsion tubes). The needle...
Wayne from Qld, 01 Guzzi Cali Stone. Why am I here? Brother-in-law owns an 02 v-tech which I ride occassionally. I raced an RVF400 in 04, re-valve...
Separate names with a comma.
