Look into a slip on from a newer zx10, I am running a yosh r77 off what i think was a 2010 ZX10 and it fit right up
Mine had the cord coming out of the bottom vs the back but yeah. You just have to block off/cut off the 3rd pin on the stock harness (its just an...
I was getting about the same mileage as OP while on my ride down to Miami last season. Average speed was between 80mph and 100mph (with full hard...
Gotta love projectors tho :D [IMG] If anyone is interested in getting projectors installed feel free to PM me, lots of options available.
I just put in a digital signal relay, worked for me.
The LCD looks a bit too bright imo.
When I tried that the light just went solid and slightly dimmed when the bike was started. Went back to a normal bulb after that.
The single blue LED with the reflector is the one I use, with no night vision issues. Might have issues when you go up to the 5 LED though. As far...
100% sure there will be no issue? My can has got pretty hot on longer rides. Is it possible to just ceramic coat the inside of the can? Worth doing?
Ah, my can is not TI though so guess I can't do this (vance and hines SS2R)
No risk of melting the plastic? Was thinking about doing the same with mine.
I got that done on mine, just need to get it finished up with the minor adjustments you mentioned. Have to lower the front end 2-5mm, the renthal...
The flood beam ones could be aimed straight, they literally flood with light. 60deg beam, spot ranges from 8-30deg.
The 10w spot/fog lights have about 1000lm each, adding them to the h4s would be a good idea. Even adding them with normal bulbs would be a good idea.
Would it not be easier to just get a set of 10w led fog/spot lights off ebay and mount those up? Or maybe run both? LED headlight and a set of...
Separate names with a comma.
