Good news -- thanks. I have three clear. I will try a bit more, and then reinstall. Happily, in San Diego, there is not much "cooler weather."
Thanks --- got a wire into two of them. Very slow and painstaking. Two to go... All side holes in other jets are clear and ready to go. What...
Update. With the shop manual in hand, I also pulled and cleaned the pilots screws, and reinstalled them. Three full turns out from seated. Not...
[ATTACH] [ATTACH] The bike sat for a while, and then had a very rough transition coming off idle. Then, after sitting a bit more, would not run....
I have my carbs out, and wonder if anyone has pictures of the parts I need to remove and clean. I have the floats and their associated parts out...
I got it -- the whole piece comes off the fender, after one loosens nuts with thirty years of road grime.
After fixing a bad ground contact, blown fuse, stuck footbrake switch, and half-burned-out bulbs, my tail/brake lights work again. But the...
The tail light on my 1986 VFR750 has just stopped working. It is not the bulb, but something upstream of that. I am not sure where even to...
Thanks for all the help. The diagnosis was spot on. I took it all apart. Cleaned the contacts. Removed a bug egg sac. And now it works, and...
I'll try that. Is that the likely spot for a bad solder joint too, do you think?
That sounds like it could be it. I noticed that it tended to be either on or off when I started the bike, rather than switching when the bike was...
My '86 VFR750F seems to specialize in idiosyncratic, intermittent electrical malfunctions. The latest is the headlight, which sometimes does not...
Separate names with a comma.
