I did not. That would have been very handy! I just filled it up, let it run and spill, and press on the pipes. We'll see in the next few weeks if...
It does look like it. I have only been doing mechanical work for a year or so. I put in a new cam, pump, lifters into a suburban, rebuilt a vstar...
Lots and lots of bubbles... it is very possible that I did a piss poor job and left tons of air in the system before. I drained it, filled, and...
I have had the bike for around 6 months, I think. I have only topped off the fluid once. I will do a full flush and a refill soon. We're working...
Yep. So today it was 93 degrees and I hit 250 degrees running. Bike is running fine... but after 45 min or so in heavy traffic it hit 250. The fan...
2 hour ride today, no light issues. I have a hard time believing it was the ground I had an issue with before... totally different symptoms. Could...
Looking forward to this. The radiators look much better black. I don't know why I did not think of that before. I went ahead and got Chinese...
Well, it seems I may be solving my own threads left and right. When I took a look at everything, all I did was turn the connector plate around on...
So I had an old thread, where the FI light would come on intermittently, beginning around 3-5k rpms, forget where. It turned out to be a ground to...
[IMG] This is on the oil cap side, subframe meets main frame. The wire was grounded with the lowest screw that holds the subframe fairing,...
I may take all of the sensors that are crying off of my salvage/donor VFR and put it on this one for shits n giggles. I doubt it would solve...
I have not, how does one do that? Thank you for the help Edit: just found it :P will do
Went out, light came on again intermittently. Sometimes only at 50 or 30 % brightness, sometimes full, and never with the clutch pulled in. BARO...
Separate names with a comma.
