[ATTACH] First off apologies as I have yet took the time to search as I only have a few minutes at work to post. I will do some searching later...
Okay, so I have removed the forks and pulled the dust seals. I have to barrow some snap ring pliers from my dad tommarow. It sounds like you...
I am being told that the fork spring still remains under some tension even with the preload turned all the way back and that a compressor or press...
Thank you for the quick response. How would you suggest supporting the bike during all this. I do not have any special stand or jack. Just the...
I have oil leaking out of my front fork on my '99. It is from the fork as you bonce the front end the shiny part of the shaft start to get more...
See Squrrelman also just mentioned the 4 drain plugs. These are the 4 I am trying to ask for help to locate? Secondly a new thought, would it...
This makes it sound like there is only one drain plus the water pump. I thought there was 4
Trying to do a coolant flush on my 99 VFR. I am understanding there are (4) 10mm drain plugs and one in the water pump. I see many bolts but...
I know its been a while since I have been on this thread but hopefully I can get a quick answer here. According to the manual I have it is .006...
Well it wont get me out of the house since it is in the basement. But this is prolly a plus since its -12 outside at the moment. Squirrel man,...
I am in the understanding that that as parts wear the gap gets sloppier not tighter? Dont she how it would get tigher unless the valve seats...
Apologies as while I was confirming this post did post, I noticed a sticky about it. Question still remains about what other services should I...
Separate names with a comma.
