I have a Dan Moto GP exhaust system. The system is not of titanium but of stainless steel but the weld look surgical. It's great-looking goes on...
Why don't you just buy an RC51 and be done with it. Either that or send your forks to Traxxon for their $1000.00 cartridge kit and put a penske on...
Hi There I'm not going to tell you how to de-link your brake... I just have to ask you and all like you WHY? I've been riding for 55 years. I've...
FYI - If you read the shop manual, you'll find out that you should turn the adjustment collar in the same direction as the wheel turns ie, ccw...
My 1998 VFR800 loaded down. DanMoto MotoGP pipe and Chinese Blue tail section. Pipe is well made, inexpensive and very LOUD! Fuel economy was as...
The original clips are the easiest to use but easy to break. The later VFR uses one that has a plastic phillips screw that works better unless you...
I know we're beating this RR/RR subject to death but here's an FYI. My 98 VFR, bought new and now with 20,000 miles, has had a few charging...
removal of collector gasket Have a new one handy and cut the old one out.
Dunlop Qualifier hands down!!!
Hey guys... check out any number of the web sites with a Honda parts fiche. You can get Honda's original chain/sprocket kit which will last...
Go get yourself a MityVac - PepBoys, AutoZone etc - hook er up and pump away... make sure your bleeder is open! I first suck the old fluid out...
My 98 has about 16k and I've had it since new. I started to notice a slight head shake between 60-50mph (slowing down). To make a long story...
I think you don't need to look at the valves til 16k
heli-coils work great if you can get the right thread pitch.
Separate names with a comma.
