Beat me to it.
There is a German co the makes one. The name escapes me right now. I'll see if I can find my note.
Sounds to me like the weight of the wheel and tire is causing some deflection in the axle. To me that spells bearings. Take the wheel off and...
I would be real careful and try and reuse the stock stuff if they look ok. Give everything a good cleaning and pay particular attention to the...
Carbs. Unless you are using no ethanol fuel which makes a big difference in carb cleanliness.
Is the tach showing the wrong rpm or is the engine revving at that rpm?
Very nice photos. Barber is a must see for any motorcycle enthusiast, but it would take several trips to see everything as they do rotate things...
Chevron Techron fuel system cleaner got me back from California on a trip I took out there. Did a rapid clean on a Mikuni downdraft carb on a...
Why oh why couldn't mother Honda give us the good comstars like these. Those things are awesome.
I'm betting on the thing falling apart and cracking the frame from the vibration. Just hasn't been ridden enough yet.
Drilling the heads off would be the next step. Remove the upper triple to get to them.
I would check the diaghrams on the slides. They have to be in the right position and located in the groove. If they leak it won't rev.
Thanks for that. They look quality. I was searching fuel rails instead of tubes.
Nothing is coming up for me on eBay for those fuel rails. Any more info you can provide?
Hook up your multi meter between the negative battery post and the negative cable. Start pulling fuses one at a time until you see the draw go...
Separate names with a comma.
