Worked beautifully, bike rides like it did before I hacked it up. Thanks again.
Thanks, I'll give this a go in the morning. On a side note, I didn't even realize you had suggested I may have taken them out sync in the first...
Thanks for advice there, it helped a little before I realized what my real problem was. Turns out I was a little stupid and it wasn't my throttle...
Yeah, on the clip there. There doesn't appear to be a way to lock the return cable in a tightened position. I've got it roughly in the position...
After doing some deep carb work I noticed my idle was quite a bit higher than usual, upon trying to adjust it I found my return doesn't have...
Damn, alright.. Guess I'll ask around and see if I can borrow one.
My carbs have been puffing out gas vapour every time I park the thing after a hot ride, so I took the time to start pulling it apart and replacing...
They also go by frame sliders. Basically pucks that go on your bike to save some damage if you lowside it. [IMG] And my bike looks like [IMG]...
I was taking a look around for possible slide pegs, but most seem to be made for the facelift after mine and some are absurdly expensive. Was...
Forgot to post an update after my ride. I think it was just the pads not being worn for the rear disc (It is pretty grooved) as after a little bit...
Didn't clean the pistons or anything except the pads and the disc with some brake cleaner. I think I'm going to take it out for a ride tomorrow...
I recently changed my front and rear pads after neglecting such for awhile. My fronts now work great, but it seems I pulled some weird bracket...
Separate names with a comma.
