Wow thanks for input. Lots of info. I was going to wrap the whole bike but I got a tail with good paint so I'm trying to match paint with...
Randy how far underneath (onto the back side of fairing) did they apply your vinyl?Like did they trim right at fairing edge or wrap it around a...
See pics? Been working with vvivid vinyl wrap. Quality stuff and cheap. Sent from my SM-G920P using Tapatalk
[IMG][IMG][IMG]. Wrapped the front fender in vivvid gloss red. It's more orange than Italian red. I'll leave it until I get a closer match. Wife...
YUP and listen to FJ12. To clarify, you are measuring the "mushroom-ed" pin head. Essentially how smashed you've made it. They should list this...
Doing a ML off the bike can usually be done, but you have to remove your left foot controls I believe to route the chain, will obviously ave to...
which chain and which tool? I know for my current chain I had to go to dealership because they had the Regina tool that I don't have. Cost me...
I had mine apart recently replacing thermostat hoses and was scratching my head when I got to the airbox. I finally realized there was no way to...
another option would be to plastic weld the backside of the panels, you would still have a hairline crack on the painted side but it would be...
So I incurred some "minor" fairing damage on my '99 (see "shiny side down" post). Front has two cracks each 3-4 inches long. one missing chunk...
Also "radial tubes" are a thing. Used for radial tires on a spoked wheel.
You're saying riding a dirt bike with a harder sidewall (less prone to deforming) would be good/fun? Well yea! Most SM guys run the latest...
Glad your OK OP. Sounds like you washed out the front, by only using the front lever and turning hard to avoid the caddy (said foot was off rear...
Yes, the black dots are the actual faring color or maybe a primer coat. My bike came from Texas (2 owners ago) and it seems to have sat in the...
Separate names with a comma.
