Thank you 50thVFR , that will be helpful.
Thank you for the diagram, it looks like this black wire was an after thought and was put on by mistake to the wrong post of the battery and got...
I haven't found any black wire relating to the r/r, or on the diagram. I plan of cutting this mess out including the connector and just solder...
Update squirrrelman, I was mistaken the red wires were NOT soldered with the green ones, however the the green ones were spiced together and...
Thank you squirrrelman for the information, the previous owner twisted both the red wire and green wired all together with the black wire and the...
Thank you Terry for the diagram, this will help to see what colors were changed.
I have a 1986 Honda VFR 700 that someone soldered the wires for the burnt stator to R/R connector. They soldered the green and red and a black...
Is this bike still available?
I initially posted this as I was concerned that a*vintage* VFR may leak/sweat oil from seals and I agree with Lazy In AZ that if seals are border...
I used the Mobil 1 without friction modifiers. I am now starting to use the new and *improved* Mobil 1 that is supposed to be made for...
Thanks mestoo, What I meant to write is I use Mobil 1 in my 02 ST1100 and my concern is I should have started my 86 VFR on semi-synthetic then...
Hi, I recently purchased an 86 RWB 700 and usually use Mobil 1 synthetic in that bike. Is it recommended for a 86 vintage bike? Thank you Gary
Thanks for the info, I probaby should have noted I have a 700 VFR. I still have the stock rims and figured I have to use the bias tires, not...
Separate names with a comma.
