i did the same thing (cleaned carbs without cleaning mix screw holes) is it possible to back the mixture screws all the way out with the carbs on...
i have to give you a bump :) i noticed the same thing on my 86 500, hope someone can answer
this is true. i managed to work the broken part out with a bunch of lubricant and some picks, it took a lot of coaxing but i finally did it. im...
does anyone have any experience (or "one of your friends" ;)) with breaking a valve cover bolt? i've ordered a new set of bolts, and a set of...
ya, i thought the same and removed the towels. i put the whole thing back together, with the gasket, just to be safe
i did :( i did the math wrong though, torque specs are 6-9FT-LBS, i converted to inch-lbs wrong and snapped it :( my own dumbass mistake.
on the FRONT head, which direction should the arrow on the cam chain guide point? towards the front of the bike (thats how it was when i took it...
i over torqued my valve cover bolts, and snapped one. i have new bolts, and a new camshaft holder (the cover bolts to the holder) already...
i have short ones in the rear already (fronts) :) i am trying to find a quality way to remove all of the stalks :/
i want to eliminate the giant turn signal stalks on this 86 vf500. has anyone here removed them, and replaced the red reflectors on either side...
also shipping is mighty high
so i had some problems with my 86 vf500 the following symptoms started: 1. started needing the choke to start the bike 2. started bogging...
Separate names with a comma.
