Thanks for the advise. I was able to pinpoint the problem. Looks like the left low beam socket was melted, causing a short. I'm off to track...
Updates.. still digging into the issue. I unplugged both high beams and both low beams. As I plug each one back on, turning ignition on /off...
I read through many posts but can't find the answer. My 2007 ABS interceptor with 19k miles just started blowing headlight fuses. As soon as I...
Thanks all for the advice. I started looking at the steering head bearings and they seem to be loose. I use the hammer and screwdriver methods...
After putting over 120,000 miles on my 5th gen VFR, I bought a 6th gen with 15,000 miles. I notice that when leaned over into a turn and...
Upon further investigation, it looks like I damaged the filament on BOTH H4 low beam lamps when I was originally trying to remove the connectors....
I just removed the cowl so I could do a fork rebuild. When I reinstalled the cowl I attached low beam connectors, high beam connectors and the...
Thanks for the quick reply. Sounds like it suppose to just hang there until it's needed during service.
Having trouble with this connector. I don;t remember unplugging it. After removing and installing the cowl, I plugged in both headlights, both...
thanks good information. I thought the clicks were many times in a revolution
I bought a used 2002 vfr and I'm thinking the rear brake pedal might not be stock or it might be bent a bit. It is positioned real close the the...
Separate names with a comma.
