am assuming your bike is a 6th gen VFR. what model Hyperpro did you install? Does it have a mounted separate reservoir or is it built into the...
after some research i am now in between a Penske and an ELKA rear suspension upgrade. any feedback on these? The ELKA i know are from Canada and I...
when selecting the spring rates do I use my weight or the sum of my weight and the passenger + luggage or an average?? thanks
I want to refresh the suspension on my 2003 VFR800 with 30,000 miles. Most of my riding is sport touring and 50% of the time I am with a...
I finally installed the heli bars and all i can. Say is What a difference!!!! I found them online here Honda VFR Interceptor seats, luggage, bars,...
Can some one point me in the right direction as to where to buy the heli bars online? I am also going to buy new dampener. How much are the damper...
ahhh, ok. It thought that when the bike is on the center stand and in 1st gear, if I pressed on the clutch lever, the rear wheel should move...
I did that last night at least 3 times and every time the clutch ended up with the same pressure. Dont get me wrong, I do have some pressure on...
ok, the only thing that worked for me was during the bleeding process was to use a syringe to push the brake fluid backwards (from bleeder screw...
ok, the only thing that worked for me was to use a syringe to push the brake fluid backwards (from bleeder screw to reservoir) and voila!!! That...
i shoved that thing in there and the clutch cover is on!!!!!!!!!!! now I need to figure out how to bleed the clutch as I just added brake fluid...
thing is that last night I open the bleeder and pushed inward on the piston and nothing, it wouldnt move. I didnt want to apply more pressure as i...
thanks!!!! FINALLY someone responded!!! I am really frustrated with this DYI, I was so pissed last night as I could not figure out how to get...
Ok after researching nag going over what I did last night, I think I might have presed on the clutch lever when putting the bike on the center...
Separate names with a comma.
