I have issues with changing gears up and down within my '84 VF500. Often it is hard to change, when possible at all. Not only change to another...
I'm back guys! Had some thesis work to do last week and was waiting for the gasket. Finally it arrived and I've placed it. And thanks captain 80s...
and can I tilt the bike flat on the side when removing the case or will I still lose a lot of oil? Or do I need to drain and refill afterwards?
Just with a cloth and some brake cleaner? and carefully scratch off the liquid gasket which was applied before?
Hi Guys, Still working on my engine swap. Engine works on 4 cilinders again, but the rpm will not go down quickly after revving a bit. Probably...
Thank you very much and have a happy new year Jer! Verzonden vanaf mijn iPhone met Tapatalk
A friend of mine took a look with me and we found out that the fuel filter was not providing enough fuel for the last carb, which I placed after...
Thanks Terry and Jeremy. I will try both of your ideas later today. @jeremyr62 I have new spark plugs since I was rebuilding the engine and aren't...
VF500F Runs on 3 cylinders after carb rev So I have a 1984 VF interceptor which broke down 3.5 years ago. A valve broke and spit aluminium...
Thanks. I've managed it to locate the wiring from the dashboard and took the old sensor from the interceptor. It differs in size and wires,...
Hmm...it only half answers my question. Where does the neutral indicator light cable leads to, from the dashboard within the Interceptor? I cannot...
Doesn't it need to be attached to the aluminum air filter mount above? In the '84 carb it should be Verzonden vanaf mijn iPhone met Tapatalk
This wire is connected just behind the braking pedal above the exhaust collector. The wires are red/green and orange/dark green. According to the...
Separate names with a comma.
