1990 VTR250

I do for my JDM Subaru. Prices for parts are much lower, and seem like different/better parts. Shipping/tariff fixes that. lol

 

Capt!!! I love the little side markers. Nice work Mr. Honda

Squirrel,
Web!ke all day long. Just have your part numbers ready before you search their site. I use Partzilla or CMSNL to see parts diagrams and cross reference that part number on Web!ke. I had saved tons on cost vs Partzilla and CMSNL, but tariffs made it equal. I still need them for my all Japan bikes (NSR/RVF..etc).

 

> Eliminated the stock turn signal mounts and installed some LED bullet running lights in the tubing section at the end.

Very inventive, is the LED bullet wrining inside the tube ?

 

Yep. Then drilled an exit hole right next to the rear mount bracket. Secured the wire with some black RTV for no visible wires.

 

The original idea came from one of my 86 VFRs I used for touring on a few trips with saddle bags. They could shine rearward, but were tucked in for the bags.



Small section of fuel line expanded a bit by the nut like bar ends for an interference fit. A smear of black RTV to hold in place and then smooth the squish out for a water tight seal.

 

Super slick!! Nice!

 

@squirrelman

hey... u c my response to ur msg on HAWKGTFORUM?

Just surprised you haven't said "cool" or "fool".

 

its all good bro--thanks-------------------------------------------------

 

Ah I see, these are the LEDs sold online as "handle bar end lights". Great photos; I definitely will look into this.

 

No. Those are bigger. These are just 18mm at the lens and have a 6mm stud.