Welcome to VFRworld.com! Log in or Sign up to interact with the community.

Bearing noise?

Discussion in 'Mechanics Garage' started by anth_85, Aug 5, 2022.

  1. anth_85

    anth_85 New Member

    Country:
    United Kingdom
    Joined:
    Jan 20, 2021
    Messages:
    6
    Likes Received:
    0
    My 2003 VFR is making a noise on power.

    - It is not there when revving the engine in neutral
    - It is not there when coasting alone off the power at any speed
    - It is not there in first gear
    - It is there in 2nd through 6th when on the power and moving, noticeable from about 2800rpm onwards
    - It sounds like a bearing and gets faster with higher revs I think
    - Cam chain tensioners were changed with genuine Honda ones very recently

    I am really struggling to narrow it down with it only doing it when moving. I presume it is not the engine since it doesn't do it stationary. It's not the chain or wheel bearing since it doesn't do it when coasting. Exhaust is fine with no leaks. I can only guess at something in the gearbox, but I really don't fancy aimlessly taking that apart. Any ideas?
     


    This site may contain affiliate links for which VFRworld may be compensated
    #1
  2. airwalk

    airwalk New Member

    Country:
    Canada
    Joined:
    Dec 14, 2007
    Messages:
    26
    Likes Received:
    6
    Location:
    Courtenay,BC (Vanc. Isl., Canada)
    It’s possible for a drive(countershaft) sprocket to be worn(“hooked”) in such a manner/degree that applying throttle & accelerating causes this kind of symptom. Almost hard to see unless comparing to a new sprocket, surprising how fussy chain& sprocket dimension really are...
     


    This site may contain affiliate links for which VFRworld may be compensated
    #2
    Thumbs likes this.
  3. Thumbs

    Thumbs Member

    Country:
    United Kingdom
    Joined:
    Jun 12, 2015
    Messages:
    1,688
    Likes Received:
    1,153
    Location:
    Bath(ish)
    ^^^^ My first thought was the chain or sprocket
     


    This site may contain affiliate links for which VFRworld may be compensated
    #3
  4. anth_85

    anth_85 New Member

    Country:
    United Kingdom
    Joined:
    Jan 20, 2021
    Messages:
    6
    Likes Received:
    0
    thanks, it's done 12,000 miles since the chain and rear sprocket was changed. I was thinking of changing it. The kit didn't come with a front sprocket so that maybe hooked. The rear one certainly doesn't look like it. The main issue for the bike was the UK lockdown. I put it away in the garage thinking I'd be back on it in a couple of weeks, but it sat there for 18 months and wasn't put away properly, totally my fault. So I am not sure if that has dried the chain out. It was changed 4 years ago.

    I just thought it odd how it doesn't do it at all in first gear.
     


    This site may contain affiliate links for which VFRworld may be compensated
    #4
  5. squirrelman

    squirrelman Member

    Country:
    United States
    Joined:
    Jul 27, 2006
    Messages:
    10,185
    Likes Received:
    877
    Location:
    Buffalo, NY
    unless an oem chain was badly rusted it shouldn't need replacement until after 20,000 miles.
     
    Last edited: Aug 5, 2022


    This site may contain affiliate links for which VFRworld may be compensated
    #5
  6. Thumbs

    Thumbs Member

    Country:
    United Kingdom
    Joined:
    Jun 12, 2015
    Messages:
    1,688
    Likes Received:
    1,153
    Location:
    Bath(ish)
    At a guess I'd say the chain has developed a tight spot from being stood or it was getting worse and you didn't notice the noise increasing before it was left
     


    This site may contain affiliate links for which VFRworld may be compensated
    #6
  7. anth_85

    anth_85 New Member

    Country:
    United Kingdom
    Joined:
    Jan 20, 2021
    Messages:
    6
    Likes Received:
    0
    it's done 12k, but I do think sitting unused probably has affected it's life. I am going to order a replacement chain with front and rear sprockets. I am away for the next few weeks, so I will hold off ordered one for now. This is what I was looking at, seems decently priced

    https://www.sportsbikeshop.co.uk/motorcycle_parts/content_prod/73258
     


    This site may contain affiliate links for which VFRworld may be compensated
    #7
  8. squirrelman

    squirrelman Member

    Country:
    United States
    Joined:
    Jul 27, 2006
    Messages:
    10,185
    Likes Received:
    877
    Location:
    Buffalo, NY
    ^^ no name chain, i'd look elsewhere.
     


    This site may contain affiliate links for which VFRworld may be compensated
    #8
  9. anth_85

    anth_85 New Member

    Country:
    United Kingdom
    Joined:
    Jan 20, 2021
    Messages:
    6
    Likes Received:
    0
    ok, not sure where to go for something better in the UK? What brands should I be looking for?
     


    This site may contain affiliate links for which VFRworld may be compensated
    #9
  10. squirrelman

    squirrelman Member

    Country:
    United States
    Joined:
    Jul 27, 2006
    Messages:
    10,185
    Likes Received:
    877
    Location:
    Buffalo, NY
    DID RK EK
     


    This site may contain affiliate links for which VFRworld may be compensated
    #10
  11. anth_85

    anth_85 New Member

    Country:
    United Kingdom
    Joined:
    Jan 20, 2021
    Messages:
    6
    Likes Received:
    0


    This site may contain affiliate links for which VFRworld may be compensated
    #11
  12. squirrelman

    squirrelman Member

    Country:
    United States
    Joined:
    Jul 27, 2006
    Messages:
    10,185
    Likes Received:
    877
    Location:
    Buffalo, NY
    both are good, but the better one is made in japan. :cool:
     


    This site may contain affiliate links for which VFRworld may be compensated
    #12
  13. anth_85

    anth_85 New Member

    Country:
    United Kingdom
    Joined:
    Jan 20, 2021
    Messages:
    6
    Likes Received:
    0
    looks like the chain and front sprocket were to blame. Chain is stiff and sprocket is a bit wavey. I am still no wiser to why it didn't make any noise in 1st but did in the other gears. Short test ride seems to suggest it's clear but ill take it for a bit longer of a run tomorrow.

    [​IMG]

    [​IMG]

    [​IMG]
     


    This site may contain affiliate links for which VFRworld may be compensated
    #13
Related Topics

Share This Page