Linked Braking

Discussion in '7th Generation 2010-Present' started by Dick D, Apr 6, 2019.

  1. Dick D

    Dick D New Member

    Country:
    United Kingdom
    Joined:
    Apr 4, 2019
    Messages:
    4
    Likes Received:
    5
    Trophy Points:
    3
    At my last service I was told my front nearside pads were a bit worn. Not in need of replacement yet, but keep an eye on them. Front offside not worn as much.
    It was explained this is due to the linked brakes. If I use the rear brake, then it also operates the front left caliper. I have used the back brake only for gentle braking in town driving.
    Question:
    If I use both front and back together will I still get uneven wear?
    Dick D
     
  2. Diving Pete

    Diving Pete Member

    Country:
    United Kingdom
    Joined:
    Mar 25, 2016
    Messages:
    1,969
    Likes Received:
    548
    Trophy Points:
    143
    Location:
    London
    Map
    You will stop quicker -

    It should even itself out a bit..
     
  3. RllwJoe

    RllwJoe Insider

    Country:
    United States
    Joined:
    Feb 2, 2017
    Messages:
    1,116
    Likes Received:
    315
    Trophy Points:
    128
    Location:
    Western Lower Peninsula, Michigan
    Map
    The piston is on the inside and that pad hits the disc first. If you are only lightly braking then the outside pad may not be pulled into contact with the disc, thus wearing out the inside pad faster than the outside. Some people will flip them once in a while to help even out the wear.
     
  4. NeedPetrol

    NeedPetrol New Member

    Country:
    United States
    Joined:
    Apr 9, 2019
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    1
    Is there any way to ‘un-link’?


    Sent from my iPhone using Tapatalk
     
  5. Gator

    Gator Insider

    Country:
    United States
    Joined:
    Nov 29, 2012
    Messages:
    5,201
    Likes Received:
    811
    Trophy Points:
    143
    Location:
    Boynton Beach, FL
    Map
    There is a thread somewhere on here about how to do it.. I read about doing it as I Fing hate linked brakes. But it was an involved process.
     
    NeedPetrol and mello dude like this.
  6. Diving Pete

    Diving Pete Member

    Country:
    United Kingdom
    Joined:
    Mar 25, 2016
    Messages:
    1,969
    Likes Received:
    548
    Trophy Points:
    143
    Location:
    London
    Map
    Basically if you have ABS, then don't do it.

    If you don't then plenty of options are open to you.
     
    NeedPetrol likes this.
  7. timbo2

    timbo2 New Member

    Country:
    United Kingdom
    Joined:
    Apr 16, 2018
    Messages:
    19
    Likes Received:
    5
    Trophy Points:
    3
    This is not because of linked brakes, there are 4 pads per calliper, two big one operated by the front brake and two smaller ones operated by the rear brake. It's the same on both sides, your uneven wear is probably due to the brakes binding on that side, you need to check the pistons move in and out freely, you should be able to push them back with your fingers.
     
  8. Alan Johnson

    Alan Johnson New Member

    Country:
    United Kingdom
    Joined:
    Jan 11, 2019
    Messages:
    27
    Likes Received:
    9
    Trophy Points:
    3
    Its not as thought it was ? Pull the front brake only, Six pistons from the front right hand caliper press in, Four pistons from the left. The rear Brake presses on two of the small pads on the front left caliper via a proportioning valve on the rear. So .. squeeze the front only, you get six pistons on the right, four pistons on the left. Am I wrong in my understanding ? There's only one hose to the front right, and two hoses to the front left.
     
  9. Diving Pete

    Diving Pete Member

    Country:
    United Kingdom
    Joined:
    Mar 25, 2016
    Messages:
    1,969
    Likes Received:
    548
    Trophy Points:
    143
    Location:
    London
    Map
    Nope you are correct, however your problem is you are not using the brakes as designed. It is not a sports bike & doesn't react like it. You really need to use both brakes.
     
  10. timbo2

    timbo2 New Member

    Country:
    United Kingdom
    Joined:
    Apr 16, 2018
    Messages:
    19
    Likes Received:
    5
    Trophy Points:
    3
    I think you maybe correct.
     
  11. Alan Johnson

    Alan Johnson New Member

    Country:
    United Kingdom
    Joined:
    Jan 11, 2019
    Messages:
    27
    Likes Received:
    9
    Trophy Points:
    3
    Just making sure we all understand how the linked brakes work .. Different than earlier Generation Hondas. And No, the one smaller pad should not wear faster than the other, they are not sliding calipers, one piston per pad. The Brakes do however have a reputation for sticking pistons on Bikes ridden through the UK winter, which will wear pads unevenly, and even distort the Disk.

    Pulling the front only used to activate a secondary slave piston on the left caliper, and put the back brake on as well. This does not happen on the 1200, Best to routinely brake with both front and rear
     
    Last edited: Apr 12, 2019
  12. RllwJoe

    RllwJoe Insider

    Country:
    United States
    Joined:
    Feb 2, 2017
    Messages:
    1,116
    Likes Received:
    315
    Trophy Points:
    128
    Location:
    Western Lower Peninsula, Michigan
    Map
    Is that a fact? I didn't know that the 7th gen brake calipers have pistons on both sides of the disk, interesting. Also, if the linked system does not apply the rear when the front brakes are applied, what is the point of linking the brakes? Is it only to help riders that are afraid to use the front brakes for fear of locking up the front or going over the bars?
     
  13. Alan Johnson

    Alan Johnson New Member

    Country:
    United Kingdom
    Joined:
    Jan 11, 2019
    Messages:
    27
    Likes Received:
    9
    Trophy Points:
    3
    Dick D likes this.
  14. Alan Johnson

    Alan Johnson New Member

    Country:
    United Kingdom
    Joined:
    Jan 11, 2019
    Messages:
    27
    Likes Received:
    9
    Trophy Points:
    3
    VFR1200 front brakes.jpg

    This is a better write up, from the workshop manual ..
     

    Attached Files:

    NeedPetrol likes this.
  15. NeedPetrol

    NeedPetrol New Member

    Country:
    United States
    Joined:
    Apr 9, 2019
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    1
    I use both brakes 90% of the time!


    Sent from my iPhone using Tapatalk
     
  16. Alan Johnson

    Alan Johnson New Member

    Country:
    United Kingdom
    Joined:
    Jan 11, 2019
    Messages:
    27
    Likes Received:
    9
    Trophy Points:
    3
    A complicated way of saying its ok just to replace the two small pads in the left had caliper by themselves if they've worn away. But replace the rest of them in both calipers as a set, because they are your front lever.
     
Related Topics

Share This Page