Welcome to VFRworld.com! Log in or Sign up to interact with the community.

1998 VFR 800 - Brake Delink Project - Front Brakes (Step 2)

Discussion in 'Mechanics Garage' started by mikerob97, Oct 18, 2014.

  1. mikerob97

    mikerob97 New Member

    Country:
    United States
    Joined:
    Jun 27, 2012
    Messages:
    102
    Likes Received:
    0
    Location:
    Cary, NC
    I have been making some progress so I thought I would give an update. I have rebuilt a pair of CBR954rr calipers. These calipers have two 30mm and two 32mm pistons per caliper for a total piston surface area of 6041mm^2 for both calipers. I disassembled, cleaned and installed new seals. Painted and reassembled with new stainless steel allen bolts. These are ready to install. There are no modifications to the calipers yet (when I attached to the VTR forks, I may need to do a little grinding and use some spacers to center them on the rotors - stay tuned)
     

    Attached Files:

    Last edited: Dec 23, 2016
    mikerob97, Oct 18, 2014


    This site may contain affiliate links for which VFRworld may be compensated
    #1
  2. mello dude

    mello dude Administrator

    Country:
    United States
    Joined:
    Jan 3, 2006
    Messages:
    4,357
    Likes Received:
    429
    Location:
    Southwest Ohio
    Those are purty Mike lookn good....


    -- Suggestion - do your build on one thread would make it easier to follow.....
     
    mello dude, Oct 18, 2014


    This site may contain affiliate links for which VFRworld may be compensated
    #2
  3. mikerob97

    mikerob97 New Member

    Country:
    United States
    Joined:
    Jun 27, 2012
    Messages:
    102
    Likes Received:
    0
    Location:
    Cary, NC
    Thanks MD - and good suggestion. I'll try to combine the writeup and pics into one thread - then delete the old ones.

    I swapped over the VTR forks this morning. Will try to mount the front calipers tomorrow and take the measurements for ordering the brake lines.
     
    mikerob97, Oct 18, 2014


    This site may contain affiliate links for which VFRworld may be compensated
    #3
  4. mello dude

    mello dude Administrator

    Country:
    United States
    Joined:
    Jan 3, 2006
    Messages:
    4,357
    Likes Received:
    429
    Location:
    Southwest Ohio
    On my assembly, I did a loose bolt up on the top mount of the VTR lower, and then swung down the caliper for fit check. If you look at the VTR leg, its a casting with a small taper angle. (called draft in foundry circles). I ground that so it was straight, maybe plus a bit more. Then little by little with a dremel tool, do the chalk spot mark and sneak up mm grind on the spot that hits. Grind it, test fit, grind it, test fit, chalk mark it, grind, test fit. Eventually it will line up.

    Photo has a few seasons on it.........

    [​IMG]
     
    mello dude, Oct 18, 2014


    This site may contain affiliate links for which VFRworld may be compensated
    #4
  5. squirrelman

    squirrelman Member

    Country:
    United States
    Joined:
    Jul 27, 2006
    Messages:
    10,185
    Likes Received:
    877
    Location:
    Buffalo, NY
    Just curious why anyone would need this mod ?? Can anyone 'splain it to me ?? Why de-engineer a useful feature ??:confusion:
     
    squirrelman, Oct 18, 2014


    This site may contain affiliate links for which VFRworld may be compensated
    #5
  6. mello dude

    mello dude Administrator

    Country:
    United States
    Joined:
    Jan 3, 2006
    Messages:
    4,357
    Likes Received:
    429
    Location:
    Southwest Ohio
    Since your newest bike is a '97 and chances are you have never ridden a newish linked braked honda, if you ride one, then you will know. That is all I'm going into. Why do people climb a mountain? Cause they can.
     
    mello dude, Oct 18, 2014


    This site may contain affiliate links for which VFRworld may be compensated
    #6
Related Topics

Share This Page