Need clutch friction plates

VF1000R 1985

My clutch has started to slip and so I need to replace the friction plates.
The OEM parts list on one website says there are only 2 required? IS that correct??

Any way if you have some to sell or you know how many friction discs are required please let me know .Thanks

 

OK...I checked my shop manual and it show 6 friction discs.

Are there any "known" issues with the spring?

 

Not sure what shop manual you have. The micro fiche shows 9-frictions and 8-steels. Also #14 spring. When I replaced my clutch in my 750 I replaced all 3 parts. The spring will loose tension, supposedly. My frictions were hardened not really worn and the steels had a small amount (.012) of warp to them. I measured the frictions and the new ones were only about .001 thicker. Don't think I even bothered looking at the spring, just replaced it.

Look here: Honda Yamaha Suzuki Kawasaki Sea-Doo Can-Am Ski-Doo Motorcycle Parts ATV parts Scooter Parts personal watercraft parts Accessories

 

Thanks for that info.
I will check all measurements once i have it all apart.
I ordered a set of OEM friction discs.

 

Yes there is a spec for the spring. It is .170 thousandths- washer type spring.
VF1000R 1985