Bushings to replace on 86 VFR750F Forks?

Hey guys,

I will replacing the springs and seals and oil washers on my 86 VFR750fg that will be staying stock. Any bushings I should order that get beat up/degrade that I should replace also?

 

..........................

Upper and lower fork bushings turn from a dull grey to copper-colored when they're worn.

Might be a good idea to replace washers on bottom bolts.

 

Maybe the snap rings?

Mine were rusted and when I removed them they became pretty beat up.

 

Yep, planned on changing those (washers) also.

 

How many miles does the bike have? I would not replace the bushings unless worn as Squirrel stated as they are a bit pricey.

 

^^ Good point. ^^

Pull everything apart and see what it needs first. Even the bushing on my VF500 forks were fine after 58,000kms.

 

I'll check to see if they need replacing, I assume you guys are talking about BUSH, GUIDE
51414-MN4-003, and BUSH, SLIDER 51415-MN4-003?

They are not too expensive, about $7.30US and $9.30US each.